Charging Sysytem

A Brusa charger will be used to charge the batteries. This charger has a CAN buss control interface so it should be possible to setup the charger with the GEVCU. Usually the charger only has to be setup for a constant current setpoint voltage and a constant voltage setpoint. The charger is designed to handle the control of the current and automatically complete the charge. The charger will be connect to the charging station via a J1772 connector and plug.  Below on the left is the charger and below that the J1772 connector and cable.  The silver connector goes to the Brusa.

Brusa chargerJ1772 Connector1